QCS CORE

6 Responses | Created by Jackel2277 |
  1. 1

    Spacing clips horizontally ...

  2. 2

    Spacing clips vertically...

  3. 3

    How many degrees should the drill hole be to prevent moisture from entering the house?

  4. 4

    The use of staples to attach cable is...

  5. 5

    minimum bending radius for series 6 cable

  6. 6

    minimum bending radius for series 7 cable

  7. 7

    minimum bending radius for series 11 cable

  8. 8

    how many inches in a sag drop per 50 feet?

  9. 9

    how many inches should there be in your working space on a pole?

  10. 10

    At house, the seperation in inches from cable to telephone should be no less than

  11. 11

    At house, the seperation in inches from cable to Power should be no less than

  12. 12

    At Pole, the seperation in inches from cable to telephone should be no less than

  13. 13

    At Pole, the seperation in inches from cable to Power should be no less than

  14. 14

    Vertical distance from cable to street

  15. 15

    Vertical distance from cable to Driveway

  16. 16

    no more than 2 inches from tap to midspan clamp

  17. 17

    Quadshield is...

  18. 18

    how many inches must you bury underground cable??

  19. 19

    ___ dBmV at all cable customer terminals. On all frequencies.

  20. 20

    ___ inches from floor to bottom of wall plate.

  21. 21

    Leave excess of ______inches in the wall cavity.

  22. 22

    drip loops at mudboxes (plaster rings, outlet boxes)

  23. 23

    drip loop __ inches at ground block

  24. 24

    Should the entry point for sdus on a prewire be near....

  25. 25

    system specifics on pre-wiring a single-family house

  26. 26

    What element or elements make up the coaxial drop cable?

  27. 27

    What material/materials is/are used for the center conductor of a CATV drop cable?

  28. 28

    What material is generally used for the cable dielectric?

  29. 29

    Which of the following components are the largest producers of attenuation in a cable network?

  30. 30

    Which signals are prevented from entering a drop cable by good shielding?

  31. 31

    What material/s help achieve good shielding?

  32. 32

    What component is the messenger made of in drop cable?

  33. 33

    Where is messengered cable used?

  34. 34

    Where is flooded cable used?

  35. 35

    What type of cable is used from the ground block to the customers' equipment?

  36. 36

    Teflon jackets are NOT fire redundant

  37. 37

    hard cables typically use copper cladded aluminum center conductors instead of copper-cladded steal.

  38. 38

    Contributors to attenuation include *cable center conductor size * dielectric material * Cable length * Temperature * Frequency

  39. 39

    How many feet generally is in a spool of drop cable?

  40. 40

    Impedance is a measurement of one of the electrical characteristics of cable. properly to maintain the 75 ohm impedance.

  41. 41

    4 cables typically used for house drops (not a question)

  42. 42

    Is low attenuation good?

  43. 43

    Low attenuation in a cable means cable is bigger.

  44. 44

    The lower number of the type of cable (eg, 6) means the cable is bigger. and vice/versa

  45. 45

    Attenuation is

  46. 46

    Which is the preferred method to route cable inside a single-family home?

  47. 47

    True or False: Identifying which rooms need cable outlets should be considered before running the cable.

  48. 48

    True or False: When routing drop cable, it's not necessary to consider cable trespass situations.

  49. 49

    True or False: When attaching cable to a building, stagger clips to avoid possible signal problems.

  50. 50

    True or False: Attach cable to water or gas pipes to help make it less noticeable.

  51. 51

    Approval to drill a hole for cable entry must be granted by

  52. 52

    Cable clips on vertical runs must be attached every

  53. 53

    True or False: Cable clips spaced exactly the same distance from one another can cause signal distortions

  54. 54

    Cable outlet wall plates are installed:

  55. 55

    True or False. A carpet punch is used to protect the cable running through the floor and the carpet.

Similar Quizzes

Users Also Took

Rating

0 votes
Take this first to vote!

Add to Favorites

Tags

© 2012 Miva AK, Inc.